Bucket Impact Pads are attached to the bucket to take the impact. These blocks can be made from either polyurethane or rubber, various shapes and sizes are available depending on your machine requirements.
+ THIS PRODUCT IS DESIGNED AS A LOAD SUPPORT BLOCK
+ AS A GUIDE, THIS BLOCK IS RATED TO WITHSTAND AN EVENLY DISTRIBUTED STATIC LOAD OF 30KG PER 1CM X 1 CM WITH MINIMUM LOAD AREA OF 100 SQUARE CENTIMETRES
+ ONLY USE ON A FLAT, EVEN, SOLID SURFACE
+ ALWAYS PERFORM YOUR OWN RISK ASSESSMENT BEFORE USING THIS PRODUCT IN ANY CONFIGURATION
+ ALWAYS FOLLOW YOUR MACHINERY MANUAL GUIDELINES
+ END FACES ARE NOT LOAD BEARING
+ TESTED TO AS1170.0 AND ASTM D1621 – 10
THIS PRODUCT IS DESIGNED AS A LOAD SUPPORT PAD
AS A GUIDE, THIS PAD IS RATED TO WITHSTAND A CENTRALLY POSTIONED EVENLY DISTRIBUTED STATIC LOAD OF 30KG PER 1CM X 1CM WITH A MINIMUM LOAD AREA OF 200 SQUARE CENTIMETRES
ONLY USE ON A FLAT, EVEN, SOLID SURFACE
ALWAYS PERFORM YOUR RISK ASSESSMENT BEFORE USING THIS PRODUCT
