Bolt or ”weld-on” polyurethane wear blocks & impact pads.
Machines either have a cavity in the top of the shoe so timber sleepers can be fitted as a wear pad or the shoe guide wheel runs directly on the steel frame.
We manufacture a polyurethane block to replace the timbers providing much better impact resistance and service life or a polyurethane pad which is fitted to the steel frame.
+ THIS PRODUCT IS DESIGNED AS A LOAD SUPPORT BLOCK
+ AS A GUIDE, THIS BLOCK IS RATED TO WITHSTAND AN EVENLY DISTRIBUTED STATIC LOAD OF 30KG PER 1CM X 1 CM WITH MINIMUM LOAD AREA OF 100 SQUARE CENTIMETRES
+ ONLY USE ON A FLAT, EVEN, SOLID SURFACE
+ ALWAYS PERFORM YOUR OWN RISK ASSESSMENT BEFORE USING THIS PRODUCT IN ANY CONFIGURATION
+ ALWAYS FOLLOW YOUR MACHINERY MANUAL GUIDELINES
+ END FACES ARE NOT LOAD BEARING
+ TESTED TO AS1170.0 AND ASTM D1621 – 10
THIS PRODUCT IS DESIGNED AS A LOAD SUPPORT PAD
AS A GUIDE, THIS PAD IS RATED TO WITHSTAND A CENTRALLY POSTIONED EVENLY DISTRIBUTED STATIC LOAD OF 30KG PER 1CM X 1CM WITH A MINIMUM LOAD AREA OF 200 SQUARE CENTIMETRES
ONLY USE ON A FLAT, EVEN, SOLID SURFACE
ALWAYS PERFORM YOUR RISK ASSESSMENT BEFORE USING THIS PRODUCT
