Important Notice: Our Banking Details Have Changed.

As of 1st May 2025, National Plastics & Rubber has officially moved to Westpac for all banking transactions. Please ensure you use our new bank details for any payments. If you haven’t already, please confirm the new details with our Accounts Team at accounts@nationalplastics.net.au. Thank you for your cooperation and support during this transition.

Mining Vehicle & Asset Identification

NevaFail LED Machine ID on large mining truck

Mining Vehicle & Asset Identification

Durable, High Visibility Identification Solutions

Every machine on a mine site needs a number that can be read at a distance, at night, in dust and in rain; by a haul truck operator, a light vehicle driver and a control room, often at the same moment. Mining vehicle identification is the system that makes that possible, and it is written into site traffic management rules for exactly that reason.

National Plastics & Rubber supplies two approaches. NevaFail™ LED asset ID panels are illuminated units with a reflective backup, designed for the machines that most need to be identified at range in poor light. Reflective mine vehicle ID signs, such as rooftop boxes and hanging panels, provide unpowered identification when a wiring run is impractical or not warranted.

Both are covered below, along with a comparison to help you decide which suits each part of your fleet.

Built for mining environments

NevaFail™ mining asset identification panels carry verified technical characteristics you can count on across various applications:

  • IP68 rated: Resistant to water, dust and oil ingress
  • Impact resistant: High-quality componentry specified to withstand impact and vibration in service
  • Tier 1 specification: Our range meets Tier 1 mining specifications
  • Visibility to 500 metres: LED lighting combined with reflective technology
  • Fail-safe design: Reflective panel maintains identification if the LED fails
  • Field tested: Like all NPR products, our mine vehicle ID signs are tested beyond expected service requirements

Reflective identification signs are manufactured from tough, durable polyurethane, with rooftop units using yellow reflective digits on a black background and hanging signs supplied with a stainless steel mounting bar.

Full specifications are published in the NevaFail™ brochure and the Resources Library.

NevaFail™ LED machine identification

NevaFail™ is an illuminated identification panel that mounts to the machine and displays its machine identification numbers in high-visibility LED. Combined with reflective technology, it provides visibility up to 500 metres and remains readable in low-light environments — enabling faster, more confident two-way positive communication between operators.

  • The fail-safe is the point of the product. Behind the LED display sits a reflective panel, so the identification number remains visible in all conditions even if the LED light fails. A conventional illuminated sign that loses power becomes a blank box on the side of a 400 tonne machine. NevaFail™ reverts to reflective identification instead, which is where the name comes from.
  • Built for the environment. Panels carry an IP68 rating and are resistant to water, dust and oil. High-quality componentry is specified to withstand impact and vibration, and the range meets Tier 1 mining specifications. Since 2019, NevaFail™ has been the preferred choice for Australia’s leading mine operators.
  • Configurations. Two body styles are available — flat panels and triangles — across 300, 400 and 600 Series digit heights. All configurations run on 24 volt. Numbers can be supplied as interchangeable digits that site personnel change themselves, or fully customised and cut to your requirements at the time of order. Triangle units are available with either bolt or magnetic attachment, and a handrail mounting bracket (NPR08659-00) is available for flat panels.
  • Broad applications include haul trucks, water trucks and mobile mining machinery.
  • Installation note: NevaFail™ should be connected to a continuous feed circuit with a stable power supply, protected by a fuse or circuit breaker and free from surges. It should not be wired into brake light circuits or any other intermittent power system.

Mining vehicle identification signs

Not every asset needs an illuminated panel. Reflective vehicle ID signs carry no power supply, no wiring and no failure mode — they simply display the number and reflect whatever light reaches them. NPR manufactures two formats.

  • Rooftop Machine Identification Numbers are mounted on the machine roof, where they are visible from above and from a distance across open ground. Bold yellow reflective digits on a black background give clear identification using a combination of letters and numbers. Two series are available — 300mm and 400mm digit heights — each with a choice of magnetic or bolt attachment, so a sign can be moved between assets or fixed permanently.
  • Hanging Machine Identification Signs are polyurethane number plates supplied with a stainless steel mounting bar, designed for haul trucks and available in blue or yellow across 600mm and 1200mm lengths. A 1150mm number panel is also available without the mounting bar, for sites with existing brackets.

LED vs reflective vehicle identification

Feature

NevaFail™ LED ID

Reflective vehicle ID

Illumination

LED

No powered illumination

Reflective visibility

Yes — fail-safe reflective panel behind the LED display

Yes — reflective digits

Power required

24V, continuous feed circuit

None

Available formats

Flat panel and triangle

Rooftop box and hanging panel

Visibility distance

Up to 500 metres

Not published — confirm

Environmental rating

IP68 — water, dust and oil resistant

Not published — confirm

Digit heights

300mm, 400mm, 600mm

300mm, 400mm (rooftop)

Custom numbers and letters

Interchangeable digits or fully customised to order

Custom numbers and letters to order

Attachment

Bolt or magnet (triangle), handrail bracket available

Magnetic or bolt (rooftop); stainless mounting bar (hanging)

Best suited to

Haul trucks, water trucks and mobile machinery requiring identification at range in low light

Assets where a powered installation is impractical, or as a secondary identification point

Mining vehicle identification your fleet can rely on

A machine identification number is only doing its job when it can be read, at range, at night, through dust, from the cab of another machine. National Plastics & Rubber has manufactured mining asset identification in Brisbane since 1997, and NevaFail™ has been the preferred choice for Australia’s leading mine operators since 2019. Every product is field-tested well beyond expected service conditions.

Enquire today to fit out your operations and ensure your site can work more efficiently with greater visibility.

FAQs

What is a mining vehicle identification panel?

It is a sign or panel fitted to a machine that displays a unique number, letter or combination so the asset can be recognised at a distance. On a mine site, this matters because operators need to know which machine they are giving way to, dispatch needs to know which unit is where, and site traffic management rules generally require every mobile asset to be identifiable. Panels are fitted to haul trucks, water trucks, dozers, graders, loaders, excavators, shovels and light vehicles.

NevaFail™ is National Plastics & Rubber’s illuminated identification system for mining machinery, combining LED lighting with a reflective backup panel. It is used on mobile mining equipment where the number needs to be read at a distance and in poor light.

Our mine vehicle ID signs can be seen up to 500 metres away.

The panel includes a fail-safe reflective panel, so the numbers remain visible in all conditions, even if the LED light fails. Identification does not depend on the machine’s electrical system remaining operational.

Our mining vehicle identification signs are rated IP68 and are resistant to water, dust and oil. IP68 is the highest ingress protection rating in the standard scale for both dust and water.

All current configurations are 24 volts. Our LED asset ID panels must be wired to a continuous-feed circuit with a stable supply, protected by a fuse or circuit breaker, and must not be connected to brake-light circuits or other intermittent-power systems.

Yes, in two ways. Interchangeable configurations let site personnel swap digits themselves as fleet numbering changes. Fully customisable configurations are cut to your requirements and nominated at the time of order. The 600 Series flat panels combine both, pairing set letters with interchangeable numbers.

LED machine identification is powered and actively illuminated; reflective identification is unpowered and relies on ambient light. The full comparison, including visibility, formats and mounting, is set out in the LED vs reflective table above.

Calculator not available for this item.

View individual Stacko™ Configurations to see load ratings.