As of 1st May 2025, National Plastics & Rubber has officially moved to Westpac for all banking transactions. Please ensure you use our new bank details for any payments. If you haven’t already, please confirm the new details with our Accounts Team at accounts@nationalplastics.net.au. Thank you for your cooperation and support during this transition.
Walking on dozer tracks, resting a heavy blade on the workshop floor and working around an open ripper frame are routine tasks for heavy vehicle maintenance crews, and each one carries slip, trip and fall risks. National Plastics & Rubber designs and manufactures dozer maintenance mats, dozer floor protection pads and purpose-built support products that give your team safe access to the machine while protecting the concrete floor beneath it.
Dozers remain a focus for regulators. In March 2024, the NSW Resources Regulator issued Safety Bulletin SB24-01 after 66 incidents involving bulldozers were reported since January 2022. Every task around these machines, including planned maintenance, deserves controls designed for the job rather than improvised timber or steel.
Choose National Plastics & Rubber’s Dozer products for superior protection, safety, and longevity in heavy-duty operations.
Showing all 23 results























Our dozer maintenance mats strap onto the track to create a safe, non-slip platform, eliminating the slip and trip hazards of walking on dozer tracks during maintenance and when accessing the cabin. Made from durable industrial plastics, they’re quick and easy to fit and available in two designs.
A rigid one-piece dozer track mat suited to workshop maintenance, available in three sizes, including a shorter 1200mm option.
A two-piece hinged dozer maintenance mat suitable for both workshop and field maintenance, available in 2000mm lengths.
Track width | Mat width | One-piece mat | Hinged mat |
610mm to 710mm (approx. 24″ to 28″) | 720mm | NPR00759-00 (1965 x 720mm) | NPR00924-00 (2000 x 720mm) |
710mm to 810mm (approx. 28″ to 32″) | 860mm | NPR02122-00 (1200 x 860mm) NPR00765-00 (1965 x 860mm) | NPR00925-00 (2000 x 860mm) |
Heavy tracks, blades and rippers can quickly damage a concrete workshop floor. Our FloorDefendaâ„¢ floor protection range is manufactured from premium-grade, lightweight polyurethane with oil, chemical, tear and UV resistance and a non-splintering construction.
These workshop floor protection mats safeguard concrete from heavy dozers and excavators as they enter and exit the workshop. Designed for use under tracked machinery, each mat measures 1100 x 800 x 14.5mm, weighs 13kg, and is load-rated to 100kg/cm². A matching trolley makes moving and storing the mats simple.
Used in sets between the blade and the floor, the FloorDefenda™ dozer blade rest pad comes in Narrow (600 x 200 x 50mm) and Wide (600 x 400 x 50mm) sizes. Both are load rated to 300kg/cm² with a patented high-traction surface.
Our dozer ripper pads protect the floor and machine against wear and impact. The Ripper Pad Medium is recommended for use with the ripper boot removed, the Ripper Pad Large suits large rippers, and the Ripper Pad with Wheels has higher sides to prevent broken parts ejecting. The Ripper Rest Block supports the ripper while the boot is removed. View all ripper and blade rest pads.
Looking for dozer track pads? Our Track Guide Pads fit securely over the lug, eliminating the catch point and helping reduce snagging incidents during installation, so your machine is back to work sooner.
Some OEM lugs differ, so please confirm sizing with our team before purchase.
Our dozer push-arm support systems are purpose-designed and tested by National Plastics & Rubber for CAT D10 and D11 dozers. The Support Block and Knuckle Block Assemblies are load rated to 10 tonnes (full assembly use only), stack up to 710mm (28″) high and can be positioned by hand without a forklift. Polyurethane reduces slippage compared with timber or steel, and each system comes with a user guide, a technical data sheet, and a load rating certificate.
The Dozer Lift Pad replaces hydraulic jacks and custom stands, so no one has to work under a suspended load. Drive the dozer forward until the front and rear of the tracks are off the ground, leaving the ripper and blade down to balance the machine, for easy access to the roller, equaliser bar, bogie pad, ripper arm and track. The 250kg heavy-duty polyurethane pad moves with a forklift or attached chain.
Sitting over the hole in the ripper frame of CAT D10 and D11 dozers, the Dozer Ripper Frame Cover creates a safe work platform for reaching overhead areas, hydraulics and engine systems without the risk of falling through. It weighs 14kg, is load-rated up to 120kg, has been independently and field-tested, and features a patented high-traction surface.
The NSW Resources Regulator’s Safety Bulletin SB22-07 reported eight collisions between rear dump trucks and dozers on overburden dumps, citing a lack of clear and positive communication between operators. Our NevaFailâ„¢ machine identification panels include a fail-safe reflective panel, so numbers stay visible even if the LED fails.
Australian-owned and operated since 1997, we field test every product we make. Our Brisbane facility offers in-house CAD design, prototyping and custom manufacturing capabilities when a standard product won’t do the job. Learn what is polyurethane? or explore our mine site case studies.
To discuss your dozer maintenance requirements, speak with our sales team on 1300 160 875 or email sales@nationalplastics.net.au.
Our dozer maintenance mats aren’t designed to be driven on. They strap onto the top of the track as a non-slip walking surface, so they’re selected by track width rather than machine weight. For the floor beneath the machine, FloorDefendaâ„¢ Floor Protection Mats are designed for use under tracked machinery and are load-rated to 100kg/cm².
Choose the rigid one-piece mat for workshop maintenance. It comes in three sizes, including a shorter 1200mm length. Choose the two-piece hinged mat if your crew also works in the field, as it suits both workshop and field maintenance.
For tracks between 610mm and 710mm (approx. 24″ to 28″), choose a 720mm-wide mat. For tracks between 710mm and 810mm (approx. 28″ to 32″), choose an 860mm-wide mat. Both widths come in one-piece and hinged designs.
Our maintenance mats protect your people, while the FloorDefendaâ„¢ range protects your floor. FloorDefendaâ„¢ Floor Protection Mats sit between tracked machinery and the concrete, while Blade Rest Pads and Ripper Pads sit between the blade or ripper and the floor.
A track guide pad fits over the track lug, eliminating the catch point and reducing snagging incidents during installation. We make them to suit CAT D10 and D11 dozers.
Use FloorDefendaâ„¢ Blade Rest Pads in sets between the blade and floor, and Ripper Pads or the Ripper Rest Block under the ripper. For push-arms on CAT D10 and D11 dozers, our 10-tonne load-rated Push-arm Support System replaces improvised timber or steel.
Yes. Speak with our sales team ahead of your shutdown to confirm quantities and timing. Our Brisbane facility has access to air, sea, rail and road distribution, and our Perth supply centre stocks FloorDefendaâ„¢ floor protection mats and workshop products for Western Australian sites.
View individual Stackoâ„¢ Configurations to see load ratings.